Cookie policy: This site uses cookies (small files stored on your computer) to simplify and improve your experience of this website. Cookies are small text files stored on the device you are using to access this website. For more information on how we use and manage cookies please take a look at our privacy and cookie policies. Some parts of the site may not work properly if you choose not to accept cookies.

sections

Colt data center gets turbo chillers

  • Print
  • Share
  • Comment
  • Save

Colt’s data center in Wapping, London, has completed the installation of Turbomiser chillers as part of an upgrade delivering a total of 3.3MW of high efficiency cooling.


The facility, at Princes Court in East London, will be cooled by six of the Turbomiser machines, each rated at 550kW.


The installation was carried out by Bristol-based specialist Cool-Therm Ltd against stiff competition, following successful performance tests with Turbomiser at Colt’s Powergate data center. Monitoring by the client showed that energy consumption fell by 55 per cent following the replacement of existing chillers with Turbomisers.


In addition to more than halving energy costs, Colt says it has benefited from significant reductions in service and maintenance costs.


Following installation of the Turbomisers, the site’s PUE has been reduced by 24%, representing a saving in electrical power of 140kW at any one point in time.

The award-winning Turbomiser chiller was developed by UK based company Cool-Therm working with Italian manufacturer Geoclima.


Ken Strong, Cool-Therm MD, said: “It was a highly competitive project, and Turbomiser was not the lowest cost option on the table. However, the impressive energy savings that have now been proven in the previous Colt installation, plus savings in service costs, proved decisive in winning the contract for Cool-Therm and Turbomiser.”

 


Over the lifespan of the equipment, it is estimated that Colt will have helped to reduce UK carbon emissions by at least 20,000 tons of CO2 (5,200 Tons of Carbon)


Based on oil-less Turbocor compressors which use virtually friction-free magnetic bearings, Turbomiser can achieve EERs of 10 and above without the need for additional free-cooling circuits with expensive glycol, saving both on initial cost and ongoing pump energy.

Related images

  • COLT CHILLERS.png

Have your say

Please view our terms and conditions before submitting your comment.

required
required
required
required
required
  • Print
  • Share
  • Comment
  • Save

Webinars

  • 5 Reasons Why DCIM Has Failed

    Wed, 15 Jul 2015 09:00:00

    Historically, DCIM systems have over-promised and under-delivered. Vendors have supplied complex and costly solutions which fail to address real business drivers and goals. Yet the rewards can be vast and go well beyond better-informed decision-making, to facilitate continuous improvement and cost savings across the infrastructure. How can vendors, customers and the industry as a whole take a better approach? Find out on our webinar on Wednesday 15 July.

  • Is Your Data Center Network Adapting To Constant Change? (APAC)

    Wed, 24 Jun 2015 05:00:00

    Over the next three years, global IP data center traffic is forecast to grow 23 percent—and 75 percent of that growth is expected to be internal*. In a constantly changing environment and as planners seek to control costs by maximizing floor space, choosing the right cabling architectures is now critical. Is your structured cabling system ready to meet the challenge? Join Anixter's Technical Services Director, Andrew Flint and DatacenterDynamics CTO Stephen Worn and Jonathan Jew, Editor ASI as they discuss how to: •Create network stability and flexibility •Future-ready cabling topology •Make the right media selection •Anticipate and plan for density demands Essential viewing for data center planners and operators everywhere – Register Now! Please note that these presentations will only be delivered in English. 1.EMEA: Tuesday 23 June, 3 p.m BST 2.Americas: Tuesday 23 June, 1 p.m CST 3.APAC: Wednesday 24 June, 1 p.m SGT APAC customers – please note the equivalent country times: India: 10:30am; Indonesia, Thailand: 12 noon; Singapore, Malaysia, Philippines, China, Taiwan, Hong Kong: 1pm; Australia (Sydney): 3pm ; New Zealand: 5pm.

  • Is Your Data Center Network Adapting To Constant Change? (Americas)

    Tue, 23 Jun 2015 18:00:00

    Over the next three years, global IP data center traffic is forecast to grow 23 percent—and 75 percent of that growth is expected to be internal. In a constantly changing environment and as planners seek to control costs by maximizing floor space, choosing the right cabling architectures is now critical. Is your structured cabling system ready to meet the challenge? Join Anixter's Technical Services Director, Andrew Flint and DatacenterDynamics CTO Stephen Worn and Jonathan Jew, Editor ASI as they discuss how to: - Create network flexibility - Future-ready cabling technology - Make the right media selection - Anticipate and plan for density demands Essential viewing for data center planners and operators everywhere - Register Now! Please note that these presentations will only be delivered in English. 1. EMEA: Tuesday 23 June, 3 p.m BST 2. Americas: Tuesday 23 June, 1 p.m CST 3. APAC: Wednesday 24 June, 1 p.m SGT APAC customers – please note the equivalent country times: India: 10:30am; Indonesia, Thailand: 12 noon; Singapore, Malaysia, Philippines, China, Taiwan, Hong Kong: 1pm; Australia (Sydney): 3pm ; New Zealand: 5pm.

  • Is Your Data Center Network Adapting To Constant Change? (EMEA)

    Tue, 23 Jun 2015 14:00:00

    Over the next three years, global IP data center traffic is forecast to grow 23 percent – and 75 percent of that growth is expected to be internal. In a constantly changing environment and as planners seek to control costs by maximizing floor space, choosing the right cabling architectures is now critical. Is your structured cabling system ready to meet the challenge? Join Anixter's Technical Services Director, Andrew Flint and DatacenterDynamics CTO Stephen Worn and Jonathan Jew, Editor ASI as they discuss how to: • Create network stability and flexibility • Future-ready cabling topology • Make the right media selection • Anticipate and plan for density demands Essential viewing for data center planners and operators everywhere – Register Now! 1. EMEA: Tuesday 23 June, 3 p.m BST 2. Americas: Tuesday 23 June, 1 p.m CST 3. APAC: Wednesday 24 June, 1 p.m SGT APAC customers – please note the equivalent country times: India: 10:30am; Indonesia, Thailand: 12 noon; Singapore, Malaysia, Philippines, China, Taiwan, Hong Kong: 1pm; Australia (Sydney): 3pm ; New Zealand: 5pm.

  • Do Industry Standards Hold Back Data Centre Innovation?

    Thu, 11 Jun 2015 14:00:00

    Upgrading legacy data centres to handle ever-increasing social media, mobile, big data and Cloud workloads requires significant investment. Yet over 70% of managers are being asked to deliver future-ready infrastructure with reduced budgets. But what if you could square the circle: optimise your centre’s design beyond industry standards by incorporating the latest innovations, while achieving a significant increase in efficiency and still maintaining the required availability?

More link