Cookie policy: This site uses cookies (small files stored on your computer) to simplify and improve your experience of this website. Cookies are small text files stored on the device you are using to access this website. For more information on how we use and manage cookies please take a look at our privacy and cookie policies. Some parts of the site may not work properly if you choose not to accept cookies.


Coolan identifies wasted power in server units

Live data shows overspecified power supplies are wasting money and energy 

Data center servers often have power supplies which are too big for the job, resulting in wasted expense and inefficiency, according to live data aggregated by Coolan. 

The startup crowdsources live performance data from data center equipment, and a major study just revealed that a single cloud provider could save thousands of dollars by specifying power supply units more accurately, according to a new blog. Coolan’s software analyzed the power used by 1600 nodes, and found that most of the servers’ power supplies were running at only around 30 percent utilization, where effiency is much lower.  

Amir Michael, Coolan

Amir Michael, Coolan

Source: Coolan

First live trial

“This study was the first time we used Coolan’s data collection in a production environment, and it demonstrated a customer’s inefficiencies,” CEO Amir Michael told DatacenterDynamics. ”We found that power supplies put in for servers are typically rated for a much higher output than the server actually needs.”

Most common power supplies have a power efficiency curve, where they are at their most effficient at the highest levels of output, where efficiency is around 95 percent. In the data Coolan gathered, it turns out that most of the power supplies were operating at around 30 percent of their maximum output, where the efficiency is five percent less. 

coolan efficiency curve of a power supply

Power efficiency curve of a typical power supply

Source: Coolan

The extra power that is used is turned into heat, and this has to be removed by cooling systems, so the actual amount of wasted energy is even higher.

Michael and Elena Novakovskaia, Coolan’s chief data scientist and co-author of the blog, reckon that scaling the power supplies down correctly could save energy and draw less power from the grid. The pair Michael explain: “Our client was leaving more than $30,000 on the table every year, and extending that over a larger data center, the amount of cost-savings could easily approach hundreds of thousands of dollars.”

The gap is significant, as it is bigger than previously suggested. Most companies only look at nameplate value, and a previous study by Google had only found a gap of between seven percent and 16 percent between the actual power drawn and the nameplate rating. 

coolan power consumption

Distribution of power consumption compared with nameplate value

Source: Coolan

“Rightsize your power supplies and your data center will run more efficiently,” said Michael, adding that Coolan data can give a more accurate value for the power required, according to the application which is being run in a given data center. He also pointed out that new rack architectures such as OpenRack, where power supplies are shared, offer more possible variation in power required, and therefore a greater opportuynity to rightsize them. 



Related images

  • coolan power consumption

Readers' comments (1)

Have your say

Please view our terms and conditions before submitting your comment.



More link